简介

Fix the lights on the top of your Google Home with a new LED Board.

This guide will teach you how to take apart your Google Home to remove a faulty LED Board and replace it with a new one.

  1. Removing the lid too quickly could cause you to tear the interconnect cable that attaches the base to the top of the lid. Pull off the Google Home’s magnetically attached base and set it aside. Using a Torx T6 screwdriver head, unscrew the four 1.7mm Torx screws deep in the speaker recess so that you can remove the lid.
    • Removing the lid too quickly could cause you to tear the interconnect cable that attaches the base to the top of the lid.

    • Pull off the Google Home’s magnetically attached base and set it aside.

    • Using a Torx T6 screwdriver head, unscrew the four 1.7mm Torx screws deep in the speaker recess so that you can remove the lid.

    • After all four screws are out, pop the lid off the device to open the capsule.

  2. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. Carefully remove the interconnect cable using a pair of tweezers.
    • Carefully remove the interconnect cable using a pair of tweezers.

  4. Use a metal spudger to pry the LED board away from the lid. This will require some force because there is a strong adhesive layer that keeps the LED board attached to the lid, so don’t worry about being gentle.
    • Use a metal spudger to pry the LED board away from the lid.

    • This will require some force because there is a strong adhesive layer that keeps the LED board attached to the lid, so don’t worry about being gentle.

    • Remove the LED board.

结论

To reassemble your device, follow these instructions in reverse order.

Gabe Hyun

于2018年04月17日注册

387 信誉积分

创作了4篇指南

团队

Cal Poly, Team S24-G11, Maness Spring 2018 Cal Poly, Team S24-G11, Maness Spring 2018 的会员

CPSU-MANESS-S18S24G11

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 10

总计 156