简介

The hard drive is a component that will act as storage for your device. This guide will go over how to remove and replace the hard drive for the P-6831FX.

配件

无需配件。

  1. Turn your laptop upside down and remove the four Philips #0 (5mm) screws for the cover of the hard drive.
    • Turn your laptop upside down and remove the four Philips #0 (5mm) screws for the cover of the hard drive.

    • Make sure to unplug your laptop charger, as removing the hard drive while the device is charging may damage the hard drive and or the charger.

    添加评论

  2. Gently pull the cover away from the device.
    • Gently pull the cover away from the device.

    • Set the cover aside for now, until reassembly.

    添加评论

    • Pull the plastic tab as shown to remove the hard drive from the device.

    添加评论

    • Remove the four Philips #0 (3mm) screws around the case for the hard drive. There will be two screws and the left and right side.

    添加评论

    • Remove the hard drive from the case.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Chandler Jardin

于2018年03月19日注册

507 信誉积分

创作了4篇指南

团队

UMass Dartmouth, Team S3-G5, Peak Spring 2018 UMass Dartmouth, Team S3-G5, Peak Spring 2018 的会员

UMASSD-PEAK-S18S3G5

2 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 28