修复你的物品 社区 商店
加入维修社区 - 创建账户

GameSir Cyclone 2 LED Replacement

简介

Follow the instructions in this guide to replace the RGB lights in your GameSir Cyclone 2 controller.

你所需要的

  1. GameSir Cyclone 2 LED Replacement, Face Plate: 步骤 1 中的图像 1，3 GameSir Cyclone 2 LED Replacement, Face Plate: 步骤 1 中的图像 2，3 GameSir Cyclone 2 LED Replacement, Face Plate: 步骤 1 中的图像 3，3

    • Flip the controller around so the back part is facing you.

    • Use a T6 Torx screwdriver to remove seven screws from the back of the controller.

    • One of the screws is hidden under the sticker. Use a pair of tweezers to lift the sticker and reveal the screw.

    编辑

  2. GameSir Cyclone 2 LED Replacement: 步骤 2 中的图像 1，1

    • The two larger screws belong on the top two sockets of the controller

    编辑

  3. GameSir Cyclone 2 LED Replacement: 步骤 3 中的图像 1，1

    • The remaining five sockets are located below, two on each side, and one in the center.

    编辑

  4. GameSir Cyclone 2 LED Replacement: 步骤 4 中的图像 1，2 GameSir Cyclone 2 LED Replacement: 步骤 4 中的图像 2，2

    • Face the controller towards you and lift up the front plate. It should pop out with minimal force.

    • The d-pad and action buttons will come loose, as well.

    编辑

  6. GameSir Cyclone 2 LED Replacement, Joystick Covers: 步骤 5 中的图像 1，3 GameSir Cyclone 2 LED Replacement, Joystick Covers: 步骤 5 中的图像 2，3 GameSir Cyclone 2 LED Replacement, Joystick Covers: 步骤 5 中的图像 3，3

    • Pull both joystick covers straight up to remove them from the controller.

    编辑

  7. GameSir Cyclone 2 LED Replacement, Left and Right Bumpers and Triggers: 步骤 6 中的图像 1，1

    • once the face plate is off locate the top bumpers

    编辑

  8. GameSir Cyclone 2 LED Replacement: 步骤 7 中的图像 1，1

    • Use a Phillips #00 driver to remove two screws on either side of the power button.

    • Remove the assembly that includes the power button and the top bumper buttons.

    编辑

  9. GameSir Cyclone 2 LED Replacement: 步骤 8 中的图像 1，1

    • remove the bumpers and replace with the new set you have aquired

    编辑

  10. GameSir Cyclone 2 LED Replacement, LED: 步骤 9 中的图像 1，1

    • Locate the two black boxes towards the bottom of the controller.

    • Remove these two boxes by pulling them away from the controller. They should snap right off.

    编辑

  11. GameSir Cyclone 2 LED Replacement: 步骤 10 中的图像 1，1

    • Locate the LED diffusers on either side of the controller face. They are clear, cylindrical strips that help spread light from the LED under the black boxes you removed in the previous step.

    • Lift the upper ends of each LED diffuser and remove them.

    编辑
结论

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.

另外一个人完成了本指南。

作者

与3其他贡献者

Ross Debortoli

于10/17/25注册

325 声望

创作了3篇指南

徽章: 8

+ 5更多徽章

团队

UMass Dartmouth, Team 2-6, Bowman Fall 2025 UMass Dartmouth, Team 2-6, Bowman Fall 2025 的会员

UMASSD-BOWMAN-F25S2G6

4 名成员

创作了7篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 6

过去 30 天： 39

总计 150