简介

If the laptop tends to overheat then the laptop fan may need to be replaced, this guide will show you how to remove the fan from the Fujitsu Lifebook S6120.

配件

无需配件。

  1. To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.
    • To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.

    • Push the two tabs in towards the laptop.

    • Lift the battery up and out from the frame of the laptop.

    添加评论

  2. Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.
    • Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.

    添加评论

    • Lift the hinge cover.

    • The hinge cover is connected to the motherboard by a ribbon cable. To prevent damage, lift hinge cover slowly.

    添加评论

    • Use the tweezers to disconnect the ribbon cable from the motherboard.

    添加评论

    • With the tweezers detach hinge cover cables from the motherboard.

    • Remove hinge cover.

    添加评论

    • Lift keyboard enough to show the ribbon cable.

    • The keyboard has a ribbon cable attached to the motherboard. Lift keyboard carefully to prevent damage.

    添加评论

    • Use a plastic opening tool to release the ribbon cable from the motherboard.

    添加评论

    • Push the secure clips outward.

    • The Adapter should pop up.

    添加评论

    • Use tweezers to remove the wires from the Adapter.

    添加评论

    • Take out the Adapter and carefully pull the wires out from the metal casing.

    添加评论

    • Use a Philips head #0 to remove the 5mm screws.

    • Use a Philips head #00 to remove the 4mm screws.

    添加评论

    • Lift up the plastic frame from the base to expose the ribbon attached to the motherboard.

    添加评论

    • Remove the ribbon from the motherboard with a pair of tweezers.

    添加评论

    • Use a 5mm nut driver to unscrew the nuts.

    添加评论

    • Pull the ribbon tab up and off the motherboard.

    添加评论

    • Remove the metal plate covering the motherboard.

    添加评论

    • Remove the 3.5mm screws with a Philips head #0.

    • Remove the metal bracket and other pieces that rely on it for structure.

    添加评论

    • Pinch your fingers around the base of the connector and pull it out.

    添加评论

    • Lift the motherboard off the plastic base.

    添加评论

    • Using a Philips head size #0 remove the 3mm screw on the back of the motherboard.

    添加评论

    • Using tweezers detach the cable from the motherboard.

    添加评论

    • The fan can now be removed from the motherboard.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Jessi Gallant

于2018年03月19日注册

893 信誉积分

创作了7篇指南

团队

UMass Dartmouth, Team S5-G5, Peak Spring 2018 UMass Dartmouth, Team S5-G5, Peak Spring 2018 的会员

UMASSD-PEAK-S18S5G5

3 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 65