简介

Use this guide to repair the clear indicator light. This guide will help you through replacing the light bulb.

  1. Make sure toaster is unplugged.
    • Make sure toaster is unplugged.

      • Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.

  2. On the left hand side, unscrew the middle screw.
    • On the left hand side, unscrew the middle screw.

  3. Remove the panel on the left hand side. The indicator light is located in the red tube that has wires covered by black tubing coming out.
    • Remove the panel on the left hand side. The indicator light is located in the red tube that has wires covered by black tubing coming out.

  4. Pull the black wires to remove the indicator light from the red tube.
    • Pull the black wires to remove the indicator light from the red tube.

  5. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  6. Use scissors to cut open cord sheathing and peel back. Use scissors to cut open cord sheathing and peel back.
    • Use scissors to cut open cord sheathing and peel back.

  7. Use the wire-cutters to remove the light bulb.
    • Use the wire-cutters to remove the light bulb.

  8. Solder the replacement light bulb back onto its original position. Solder the replacement light bulb back onto its original position.
    • Solder the replacement light bulb back onto its original position.

  9. Use electrical tape to reseal the sheathing.
    • Use electrical tape to reseal the sheathing.

  10. Reinsert the indicator light back into the red tube.
    • Reinsert the indicator light back into the red tube.

  11. Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.
    • Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.

  12. On the left hand side, screw the middle screw back in.
    • On the left hand side, screw the middle screw back in.

结论

To reassemble your device, follow these instructions in reverse order.

Tony Wang

于2012年10月05日注册

64 信誉积分

创作了5篇指南

团队

Cal Poly, Team 6-35, Regan Fall 2012 Cal Poly, Team 6-35, Regan Fall 2012 的会员

CPSU-REGAN-F12S6G35

4 名成员

创作了6篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 503