跳转到主内容

DualShock 3 Front Shell Cover Replacement

你所需要的

  1. DualShock 3 Front Shell Cover Replacement, Front Shell Cover.: 步骤 1 中的图像 1,2 DualShock 3 Front Shell Cover Replacement, Front Shell Cover.: 步骤 1 中的图像 2,2
    • Flip the controller over and locate the five 7.2mm Phillips #0 screws securing the rear cover to the front cover.

  2. DualShock 3 Front Shell Cover Replacement: 步骤 2 中的图像 1,3 DualShock 3 Front Shell Cover Replacement: 步骤 2 中的图像 2,3 DualShock 3 Front Shell Cover Replacement: 步骤 2 中的图像 3,3
    • Using the Phillips #0 screwdriver, remove the five screws holding the rear/back cover in place.

  3. DualShock 3 Front Shell Cover Replacement: 步骤 3 中的图像 1,2 DualShock 3 Front Shell Cover Replacement: 步骤 3 中的图像 2,2
    • Gently lift the rear cover away from the rest of the controller starting from the bottom side adjacent to the analog stick controllers.

    • Push gently by sliding the rear back forward towards the top edge of the dual shock controller to prevent tripping the two bottom triggers labelled (2).

  4. DualShock 3 Front Shell Cover Replacement: 步骤 4 中的图像 1,1
    • Lift the rear cover off of the controller to expose the interior.

  5. DualShock 3 Front Shell Cover Replacement: 步骤 5 中的图像 1,3 DualShock 3 Front Shell Cover Replacement: 步骤 5 中的图像 2,3 DualShock 3 Front Shell Cover Replacement: 步骤 5 中的图像 3,3
    • Carefully detach or disconnect the lithium polymer battery from the motherboard.

    • The wires are fragile, be careful not to break them when pulling out the battery as they can break easily.

  6. DualShock 3 Front Shell Cover Replacement: 步骤 6 中的图像 1,3 DualShock 3 Front Shell Cover Replacement: 步骤 6 中的图像 2,3 DualShock 3 Front Shell Cover Replacement: 步骤 6 中的图像 3,3
    • Use the Phillips #0 screwdriver to remove five 7.2 mm screws from the motherboard.

    • Lift the motherboard, vibration motors and analog module joysticks pads all in one connection, away from the shell.

  7. DualShock 3 Front Shell Cover Replacement: 步骤 7 中的图像 1,2 DualShock 3 Front Shell Cover Replacement: 步骤 7 中的图像 2,2
    • Carefully lift the rubber or plastic part holding the button triggers labelled (2) in place.

    • Be careful not to strip the plastic rubber holding the triggers in place.

    • Slide the trigger button retainers away from the front shell. Set them aside.

  8. DualShock 3 Front Shell Cover Replacement: 步骤 8 中的图像 1,1
    • Set aside the colored buttons and lift the white rubber part holding the Dpad buttons in place to securely remove it.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Joseph Wambui

于07/09/21注册

253 声望

撰写一个指南

团队

York University, Team 1-28, O'Regan Fall 2021 York University, Team 1-28, O'Regan Fall 2021 的会员

YORK-O'REGAN-F21S1G28

1 名成员

创作了2篇指南

2条评论

Personally I believe with the current price of a DualShock 3 controller its not even worth it to replace the following parts. Or maybe its just me? Sony has done a great product and will continue to do so!

Andrew McMason - 回复

The original 6 axis controller I got with my PS3 back in the day has different size screws than the gold plated one I got a few years later. They're about 3 mm longer too

Gregory Hedges - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 28

过去 30 天: 115

总计 3,200