配件

无需配件。

  1. Unscrew these #1 Philips screws, and leave them in the plastic foot holders.
    • Unscrew these #1 Philips screws, and leave them in the plastic foot holders.

  2. Remove the foot holders and place them on the side
    • Remove the foot holders and place them on the side

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. Remove the four feet and place them on the side
    • Remove the four feet and place them on the side

  5. Remove these #1 Philips screws, and leave them in their counterbores
    • Remove these #1 Philips screws, and leave them in their counterbores

  6. Lift grey shell off and place to the side to reveal:
    • Lift grey shell off and place to the side to reveal:

    • ADC and Logic board

    • Bluetooth module

    • Strain gauges

    • Battery holder

  7. The ADC and Logic board contains:
    • The ADC and Logic board contains:

    • Bluetooth module

    • Power button connector

    • Battery and sync button connector

    • Strain gauge wheatstone bridge connections

      • The topmost connection for each of the four bridge connections is the ground; relative to this, the two middle connections should be at 1.2 VDC, and the bottom should be at 2.7 VDC

结论

To reassemble your device, follow these instructions in reverse order.

11等其他人完成本指南。

Pete Marchetto

于2011年01月25日注册

451 信誉积分

撰写一个指南

Great stuff Pete, being able to fix the wifi board got me mucho street cred with " her indoors " and lots of other goodies that go along with that

HENRY - 回复

Can I take out the battery box without removing the bottom?

Richard Merchant - 回复

No, you can't. You will have to follow this procedure completely.

paulo lima -

浏览统计数据:

过去的24小时: 0

过去的7天: 8

过去的30天: 54

总计 8,383