跳转到主内容

简介

How to remove keyboard

  1. Push open the latch and remove the battery. Push open the latch and remove the battery.
    • Push open the latch and remove the battery.

  2. Twist off the antenna. Pop off the transparent cylinder.
    • Twist off the antenna.

    • Pop off the transparent cylinder.

  3. Remove the five screws as shown.
    • Remove the five screws as shown.

  4. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  5. Carefully pry the back plate off.
    • Carefully pry the back plate off.

  6. Carefully detach golden screen connector. Carefully detach golden screen connector.
    • Carefully detach golden screen connector.

  7. Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
    • Pop out the logic board with spudger.

    • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

  8. Place the logic board on a clean tray. Place the logic board on a clean tray.
    • Place the logic board on a clean tray.

  9. Peel off the keyboard.
    • Peel off the keyboard.

结论

To reassemble your device, follow these instructions in reverse order.

doconnor

于2010年04月19日注册

25 信誉积分

创作了6篇指南

团队

Cal Poly, Team 10-43, Garner Spring 2010 Cal Poly, Team 10-43, Garner Spring 2010 的会员

CPSU-GARNER-S10S10G43

5 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 1,069