跳转到主内容
加入维修社区 - 创建账户

Disassembling Planet Eclipse Etha Frame

你所需要的

    1. Disassembling Planet Eclipse Etha Frame, Regulator: 步骤 1 中的图像 1,2 Disassembling Planet Eclipse Etha Frame, Regulator: 步骤 1 中的图像 2,2
      • Firmly grasp hold of the ring on the bottom of the 90 degree silver fitting on the front of the gun.

      • Pull hard, but slowly, on the macroline where it comes out of silver piece until it comes out.

      • The macroline is the black hose connecting the regulator to the tank connection.

      询问修复机器人

      添加评论

    2. Disassembling Planet Eclipse Etha Frame: 步骤 2 中的图像 1,2 Disassembling Planet Eclipse Etha Frame: 步骤 2 中的图像 2,2
      • Remove the regulator by unscrewing it in a clockwise direction.

      询问修复机器人

      添加评论

    1. Disassembling Planet Eclipse Etha Frame, Battery and Grip Panels: 步骤 3 中的图像 1,2 Disassembling Planet Eclipse Etha Frame, Battery and Grip Panels: 步骤 3 中的图像 2,2
      • Use the 5/64" hex key to remove the screw shown.

      • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

      • If you are only replacing the battery, skip the next step.

      • The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

      询问修复机器人

      添加评论

    2. Disassembling Planet Eclipse Etha Frame: 步骤 4 中的图像 1,1
      • Flip the marker over and use the 5/64" hex key to remove the screw shown.

      • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

      询问修复机器人

      添加评论

    3. Disassembling Planet Eclipse Etha Frame: 步骤 5 中的图像 1,2 Disassembling Planet Eclipse Etha Frame: 步骤 5 中的图像 2,2
      • Carefully remove the 9V battery and connector.

      • Remove the 9V battery from the connector.

      询问修复机器人

      添加评论

    1. Disassembling Planet Eclipse Etha Frame, Frame: 步骤 6 中的图像 1,2 Disassembling Planet Eclipse Etha Frame, Frame: 步骤 6 中的图像 2,2
      • Carefully disconnect the three connectors from the circuit board.

      • Don't worry about remembering which direction the connectors go in, they will not fit in the board in the wrong direction.

      询问修复机器人

      添加评论

    2. Disassembling Planet Eclipse Etha Frame: 步骤 7 中的图像 1,2 Disassembling Planet Eclipse Etha Frame: 步骤 7 中的图像 2,2
      • Use the 1/8" hex key to remove the two dome-headed screws by rotating them counter-clockwise.

      询问修复机器人

      添加评论

    3. Disassembling Planet Eclipse Etha Frame: 步骤 8 中的图像 1,1
      • Be very careful during the step to avoid damage to the solenoid or wiring.

      • Gently separate the top and bottom of the marker.

      询问修复机器人

      添加评论

结论

To reassemble your device, follow these instructions in reverse order.

取消:我没有完成这个指南。

nicholasj6

于10/14/14注册

261 声望

创作了2篇指南

团队

Cal Poly, Team 10-42, Amido Fall 2014 Cal Poly, Team 10-42, Amido Fall 2014 的会员

CPSU-AMIDO-F14S10G42

5 名成员

创作了7篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 8

过去 30 天: 27

总计 679