加入维修社区 - 创建账户

简介

This guide will show you how to open your Flip Video and remove the main circuit board.

你所需要的

1. 步骤 1 Outer Shell
  Turn off the device and take the batteries out.
  
  Remove metal sticker under the LCD screen with a spudger.
  
  This may require a large force to pry off the glued sticker.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 3
  Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 4
  Open battery door. This can be done by gently depressing and sliding the battery down downward.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
6. 步骤 5
  Use the spudger to separate outer shells.
  
  The spudger must be inserted between the shell halves to pry the edges apart.
  
  Slowly work around the outside to separate the halves.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 6 Circuit Board
  Remove the 3 5mm screws securing the circuit board to the front shell with the #00 Phillips screwdriver.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 7
  Slowly lift the left side of the circuit board.
  
  Do not attempt to remove the circuit board completely yet. It is still connected to the device.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 8
  Disconnect the USB port cable from the back side of the circuit board.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 9
  Slide out the battery contacts.
  
  Battery contacts
  
  Slot where battery contacts were located
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024