To remove the battery from the casing, grab the front panel and back panel with opposite hands (as shown).  The back panel is the same as the battery. With your index finger, push in the button on the bottom of the battery to release it. Pull the battery away from the phone.
  • To remove the battery from the casing, grab the front panel and back panel with opposite hands (as shown). The back panel is the same as the battery.

  • With your index finger, push in the button on the bottom of the battery to release it.

  • Pull the battery away from the phone.

添加评论

After removing the battery, the front phone casing becomes accessible. Locate the two star-shaped T6 screws on the bottom end of the rear of the phone, underneath the battery, as indicated by the red circles. Remove these two screws using the Torx T6 Screwdriver.
  • After removing the battery, the front phone casing becomes accessible.

  • Locate the two star-shaped T6 screws on the bottom end of the rear of the phone, underneath the battery, as indicated by the red circles.

  • Remove these two screws using the Torx T6 Screwdriver.

添加评论

Locate the top two U-shaped screws on the back of the phone, as shown by the red circles. Remove these two screws with a SP 2.6 screw driver. Note:  Remove gray plastic grommets with screws.
  • Locate the top two U-shaped screws on the back of the phone, as shown by the red circles.

  • Remove these two screws with a SP 2.6 screw driver.

  • Note: Remove gray plastic grommets with screws.

添加评论

Grab opposite panels of the phone casing and carefully open and pull apart the phone, as shown in the image. Note:  Be careful not to damage the circuit board and components as you as open the casing.
  • Grab opposite panels of the phone casing and carefully open and pull apart the phone, as shown in the image.

  • Note: Be careful not to damage the circuit board and components as you as open the casing.

添加评论

Locate the circuit board on the rear side of the front phone casing (right side of image).
  • Locate the circuit board on the rear side of the front phone casing (right side of image).

  • Locate the mounting screws (indicated by red circles), which attach the board to the rear side of the front phone casing.

添加评论

Using the SP2.6 u-shaped screw driver in one hand, loosen and remove both center screws.  Hold the back part of the screw with the metal tweezers. Using the SP2.6 u-shaped screw driver in one hand, loosen and remove both center screws.  Hold the back part of the screw with the metal tweezers. Using the SP2.6 u-shaped screw driver in one hand, loosen and remove both center screws.  Hold the back part of the screw with the metal tweezers.
  • Using the SP2.6 u-shaped screw driver in one hand, loosen and remove both center screws. Hold the back part of the screw with the metal tweezers.

添加评论

Completely remove the two center screw as shown. Note:  the hand not holding the screw driver is holding the back part of the screw and the panel in place.
  • Completely remove the two center screw as shown.

  • Note: the hand not holding the screw driver is holding the back part of the screw and the panel in place.

添加评论

Locate the final screw at the top of the phone near the antenna, as shown by the red circle. Using the U-shaped screw driver, remove the top screw.
  • Locate the final screw at the top of the phone near the antenna, as shown by the red circle.

  • Using the U-shaped screw driver, remove the top screw.

添加评论

With one hand on the circuit board and one hand on the phone casing, carefully pull apart the circuit board from the front panel casing. With one hand on the circuit board and one hand on the phone casing, carefully pull apart the circuit board from the front panel casing.
  • With one hand on the circuit board and one hand on the phone casing, carefully pull apart the circuit board from the front panel casing.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Niccolas Tones

于2012年03月09日注册

55 信誉积分

创作了18篇指南

团队

Clemson, Team 1-1, Benson Spring 2012 Clemson, Team 1-1, Benson Spring 2012 的会员

CLEM-BENSON-S12S1G1

3 名成员

创作了21篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,122