跳转到主内容

简介

If your Dell VRP100 headset has a cracked, scratched or broken lens you are definitely going to want to replace it. This guide has all the steps for you need replace those beat up lenses with new ones. You will need a metal spudger for parts of this guide.

  1. Remove the black foam padding by peeling away slowly. Remove the front and back padding from the headset by peeling away slowly. Remove the front and back padding from the headset by peeling away slowly.
    • Remove the black foam padding by peeling away slowly.

    • Remove the front and back padding from the headset by peeling away slowly.

  2. Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
    • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

    • Cover panel may need to be pushed in before inserting screws.

  3. Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing. Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing. Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.
    • Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.

  4. Apple Watch 套装

    Screen and battery repairs just got easier.

    现在开始购物

    Apple Watch 套装

    Screen and battery repairs just got easier.

    现在开始购物
  5. Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise. Carefully remove the lens and motherboard assembly from the white casing. Carefully remove the lens and motherboard assembly from the white casing.
    • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

    • Carefully remove the lens and motherboard assembly from the white casing.

  6. Deattach the black cover from the lens with a metal spudger. This will “click” back into place during replacement.
    • Deattach the black cover from the lens with a metal spudger.

    • This will “click” back into place during replacement.

  7. Gently insert the metal spudger between the lens and the lens casing. Rotate the spudger around the exterior of the lens and lens housing, separating them. The lens is held in place with an adhesive that will have to be applied during reassembly.
    • Gently insert the metal spudger between the lens and the lens casing.

    • Rotate the spudger around the exterior of the lens and lens housing, separating them.

    • The lens is held in place with an adhesive that will have to be applied during reassembly.

  8. Holding the lens around the outside, gently lift it out of its housing.
    • Holding the lens around the outside, gently lift it out of its housing.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Chris Grabow

于2018年10月08日注册

258 信誉积分

创作了2篇指南

团队

Cal Poly, Team S17-G1, White Fall 2018 Cal Poly, Team S17-G1, White Fall 2018 的会员

CPSU-WHITE-F18S17G1

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 4

过去的30天: 12

总计 190