简介
Hi everyone, In this guide, I'll show you how to disassemble to replace the main parts of the DJI Mini 3 Pro drone.
Additional Information
After replacing the drone's GPS module, you will need to calibrate the drone in the DJI Fly mobile app.
To replace the ESC board and drone arms, you will need a soldering iron.
After replacing the motherboard, you will need to calibrate the gimbal camera.
Use this manual to calibrate the gimbal camera https://youtu.be/mu03HWXplM4
你所需要的
视频介绍
结论
To reassemble your device, follow these instructions.
7等其他人完成本指南。
1指南评论
Wie kann ich die Heißklebestellen "materialschonend" lösen? Ich trau mich da nicht mit dem Heißluftgeläse ran.
Woifi - 回复 分享