加入维修社区 - 创建账户

简介

We are defining the DJI Mini 2 drone body as the top and bottom plastic panels of the drone. These panels are the blockaded between the insides of the drone and the outside world.

The drone body stores the inner electronic parts of the drone like the GPS, the Main Board, and the wires the drone uses. Damage to the drone body can cause the drone to be unstable in flight. If the body of the drone is damaged they will need to be replaced.

你所需要的

1. 步骤 1 Battery
  Face the DJI Mini 2 away from you so that you are looking at the charging ports.
  
  Use your finger to open up the back panel.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Pinch the locking mechanism on the battery to release the lock.
  
  Pull the battery straight out of the compartment.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 3 Drone Body
  Unfold the wings of the drone.
  
  Place the drone upside down on a flat surface.
  
  There should be stickers on the device telling you how to unfold the propeller arms.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 4
  Remove the four 5 mm J000 screws near each propeller arm.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 5
  Flip the drone back over.
  
  Use a combination of the opening tool and your fingers to pry open the top panel of the drone along the seams.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 6
  Remove the two 5 mm J000 screws located in the battery hatch and near the ports on the back of the drone.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
6. 步骤 7
  Flip the drone over again.
  
  Pry off the bottom panel of the drone using the opening tools and your fingers.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024