简介

This tutorial will provide the necessary information on how to replace a power cable in the Crosley CR42.

  1. Turn the device around until you are looking at the line-out port. With a cordless drill or Phillips #0 screwdriver, remove the ten 12-mm screws.
    • Turn the device around until you are looking at the line-out port.

    • With a cordless drill or Phillips #0 screwdriver, remove the ten 12-mm screws.

  2. Gently remove the back of the device. It should be connected by two wires. Gently remove the back of the device. It should be connected by two wires. Gently remove the back of the device. It should be connected by two wires.
    • Gently remove the back of the device. It should be connected by two wires.

  3. Gently remove both wires. After de-threading the antenna wire, remove the back of the device and set it aside. After de-threading the antenna wire, remove the back of the device and set it aside.
    • Gently remove both wires.

    • After de-threading the antenna wire, remove the back of the device and set it aside.

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  5. Locate where the power cable connects to the device. Pick up the device and locate the screw holding the small black peg to the device. Unscrew it and set the screw aside. Pick up the device and locate the screw holding the small black peg to the device. Unscrew it and set the screw aside.
    • Locate where the power cable connects to the device.

    • Pick up the device and locate the screw holding the small black peg to the device. Unscrew it and set the screw aside.

  6. With the pliers, remove the wire connectors. You may need to be forceful It is wise to attach a marking in order to recognize how the wires should be reattached. It is wise to attach a marking in order to recognize how the wires should be reattached.
    • With the pliers, remove the wire connectors. You may need to be forceful

    • It is wise to attach a marking in order to recognize how the wires should be reattached.

  7. Pull apart both groups of wires. After getting your replacement power cord, make sure you recognize how the wires should reattach. After getting your replacement power cord, make sure you recognize how the wires should reattach.
    • Pull apart both groups of wires.

    • After getting your replacement power cord, make sure you recognize how the wires should reattach.

  8. Twist the connecting wires together. Attach the twist-on wire connectors to the exposed wires. Attach the twist-on wire connectors to the exposed wires.
    • Twist the connecting wires together.

    • Attach the twist-on wire connectors to the exposed wires.

结论

To reassemble your device, follow these instructions in reverse order.

Eric Dybsetter

于2014年01月26日注册

142 信誉积分

撰写一个指南

团队

Cal Poly, Team 1-38, Maness Winter 2014 Cal Poly, Team 1-38, Maness Winter 2014 的会员

CPSU-MANESS-W14S1G38

4 名成员

创作了5篇指南

浏览统计数据:

过去的24小时: 4

过去的7天: 10

过去的30天: 65

总计 3,621