简介

This guide will disassemble the fan to clean the fan blades.

配件

无需配件。

  1. Use a Philips #2 screwdriver to unscrew the four 6mm Phillips #0 back screws.
    • Use a Philips #2 screwdriver to unscrew the four 6mm Phillips #0 back screws.

    • Do this by unscrewing from left-to-right then pull the screws out of the back of the fan

  2. Pull the front and back cover apart.
    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely because it holds the wires.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. Remove the Phillips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan.
    • Remove the Phillips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan.

    • Make sure the fan is unplugged while removing the circuit board as you may get shocked.

    • To remove the screws, unscrew in a left-to-right fashion at an angle to make sure that the wires do not get tangled.

  5. Remove the top cover containing the circuit board and the wires by pulling it away from the body of the fan.
    • Remove the top cover containing the circuit board and the wires by pulling it away from the body of the fan.

  6. Remove the circuit board from the top cover. Do not touch the other side of the circuit board as you  may damage circuit elements. Unscrew the four screws on the top of the circuit board in a left-to-right fashion. After pull screws out of the board.
    • Remove the circuit board from the top cover. Do not touch the other side of the circuit board as you may damage circuit elements.

    • Unscrew the four screws on the top of the circuit board in a left-to-right fashion. After pull screws out of the board.

  7. Follow steps 1-4 to remove the front, back, and top covers of the fan to reach the fan blades.
    • Follow steps 1-4 to remove the front, back, and top covers of the fan to reach the fan blades.

    • Use a cloth to clean off dust clogged in between the fan blades.

结论

To reassemble your device, follow these instructions in reverse order.

Vivian Fong

于2012年09月26日注册

73 信誉积分

撰写一个指南

团队

Cal Poly, Team 15-46, Forte Fall 2012 Cal Poly, Team 15-46, Forte Fall 2012 的会员

CPSU-FORTE-F12S15G46

5 名成员

创作了6篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 40

总计 5,667