简介

You will learn how to take apart the necessary parts of the controller, how to clean the inside, and how certain parts are supposed to aligned or inserted into other parts.

  1. Remove  the 9 external screws (4.8 mm Phillips head) on the back of the controller.
    • Remove the 9 external screws (4.8 mm Phillips head) on the back of the controller.

    • Remove the back panel from the controller.

    添加评论

  2. Remove the 3 screws (4.8 mm Phillips head) from the back of the white box.
    • Remove the 3 screws (4.8 mm Phillips head) from the back of the white box.

    • Remove the back panel of the joystick box.

    • There are many small plastic components loose in this box; be careful not to lose these.

    • Separate the rubber pads and plastic buttons from the controller.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a soft cleaning material, clean the plastic buttons.

    • Using a toothpick, clean the pole slot, shown at the right of the Q-Tip.

    添加评论

    • Using a damp, soft cleaning material, clean the rubber button pads.

    • To ensure that no electrical damage occurs, ensure that you dry the pieces completely after cleaning them.

    添加评论

    • Reinsert the buttons, ensuring that the rubber, cylindrical pieces protruding from the buttons are lined up with their corresponding circuits.

    添加评论

结论

Follow these steps in reverse order to reassemble your device.

4等其他人完成本指南。

Jason Gittler

于2013年07月22日注册

102 信誉积分

撰写一个指南

团队

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 11

过去的30天: 43

总计 2,646