修复你的物品 社区 商店
加入维修社区 - 创建账户

Capresso Perfectea 260 Lid Replacement

简介

If your lid has become warped over time, use this guide to replace it.

你所需要的

  1. Capresso Perfectea 260 Lid Replacement, Lid: 步骤 1 中的图像 1，1

    • Lift the lid of the Perfectea

    • Remove the two 12mm Phillips #2 screws located at the brim of the pot.

    翻译

  3. Capresso Perfectea 260 Lid Replacement: 步骤 2 中的图像 1，3 Capresso Perfectea 260 Lid Replacement: 步骤 2 中的图像 2，3 Capresso Perfectea 260 Lid Replacement: 步骤 2 中的图像 3，3

    • Adhesive tape is left holding the lid to the glass pot.

    • Use the spudger for this step.

    • With one hand, firmly grip the lid while designating your other hand to wedge the spudger between the lid and the glass pot.

    • Working from the outside to the inside, gently pry the adhesive tape from the glass pot, detaching the lid.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与3其他贡献者

Kenji Anzai

于04/14/15注册

594 声望

创作了4篇指南

徽章: 14

+ 11更多徽章

团队

Cal Poly, Team 6-17, Maness Spring 2015 Cal Poly, Team 6-17, Maness Spring 2015 的会员

CPSU-MANESS-S15S6G17

4 名成员

创作了6篇指南

2指南评论

This guide applies to the Capresso H2O kettle too. Thanks for the guide.

Giovanni Ciriani - 回复

What kind of adhesive tape is it and where can I get some? That piece that you pried off had already fallen off of my kettle.

George Shaeffer - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 4

过去 30 天： 14

总计 868