简介

This guide will walk you through the process of replacing a dull or broken cutter blade on a Brother PT-D200.

  1. Open the back panel of the device by pressing down on and then pulling the indication arrows on the top center of the cover upward towards you. Open the back panel of the device by pressing down on and then pulling the indication arrows on the top center of the cover upward towards you.
    • Open the back panel of the device by pressing down on and then pulling the indication arrows on the top center of the cover upward towards you.

  2. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. Locate the cutter blade unit (mint green) as shown in the picture.
    • Locate the cutter blade unit (mint green) as shown in the picture.

  4. Using the thumb and forefinger, pull up, applying a moderate amount of pressure until the cutter blade unit loosens and is removed. The blade is sharp.
    • Using the thumb and forefinger, pull up, applying a moderate amount of pressure until the cutter blade unit loosens and is removed.

    • The blade is sharp.

结论

To reassemble your device, follow these instructions in reverse order.

Blaire McCreary

于2014年01月24日注册

201 信誉积分

创作了2篇指南

团队

Cal Poly, Team 13-16, Regan Winter 2014 Cal Poly, Team 13-16, Regan Winter 2014 的会员

CPSU-REGAN-W14S13G16

3 名成员

创作了6篇指南

Where can you order the replacement blade?

mistymeziere - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 11

总计 1,169