Before beginning this installation, make sure phone is powered off . Turn phone over to the backside. Press down on the lower portion of the back cover.
  • Before beginning this installation, make sure phone is powered off .

  • Turn phone over to the backside.

  • Press down on the lower portion of the back cover.

  • Slide the lower portion down to remove the cover and reveal the battery.

添加评论

Remove the battery from the phone.
  • Remove the battery from the phone.

添加评论

Once the battery is removed, remove the four 9.2 mm screws with the T4 Torx Screwdriver. Once the battery is removed, remove the four 9.2 mm screws with the T4 Torx Screwdriver.
  • Once the battery is removed, remove the four 9.2 mm screws with the T4 Torx Screwdriver.

添加评论

Remove side panels with the Plastic Opening Tool by sliding it along the edge of the panel until you can pry it off with the tool. Remove side panels with the Plastic Opening Tool by sliding it along the edge of the panel until you can pry it off with the tool. Remove side panels with the Plastic Opening Tool by sliding it along the edge of the panel until you can pry it off with the tool.
  • Remove side panels with the Plastic Opening Tool by sliding it along the edge of the panel until you can pry it off with the tool.

添加评论

Remove the back casing using the Plastic Opening Tool Once the back casing is removed the top two buttons are likely to pop out.
  • Remove the back casing using the Plastic Opening Tool

    • Once the back casing is removed the top two buttons are likely to pop out.

添加评论

Locate the two 9.2mm screws on the upper inside casing Remove them using the T4 Torx Screwdriver Slide off the front casing once the screws are removed.
  • Locate the two 9.2mm screws on the upper inside casing

  • Remove them using the T4 Torx Screwdriver

  • Slide off the front casing once the screws are removed.

    • Trackball will fall out once the casing is removed.

添加评论

Remove the keyboard from the front casing. Remove the keyboard from the front casing. Remove the keyboard from the front casing.
  • Remove the keyboard from the front casing.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Martha de Maria y Campos

于2012年04月12日注册

37 信誉积分

创作了5篇指南

团队

Cal Poly, Team 17-27, Amido Spring 2012 Cal Poly, Team 17-27, Amido Spring 2012 的会员

CPSU-AMIDO-S12S17G27

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 401