Black and Decker JS660 Base Replacement - iFixit 维修指南

简介

In the unfortunate case of where your black and decker jigsaw base is broken this guide is here to show you how to replace the base. This will require you to remove the existing plate and replace it. Following the guides will show you how to replace the base without damaging any other parts of the jigsaw.

你所需要的

步骤 1 Base

Black and Decker JS660 Base Replacement, Base: 步骤 1 中的图像 1，2

Black and Decker JS660 Base Replacement, Base: 步骤 1 中的图像 2，2

Unscrew the eight screws to open up the jigsaw.

步骤 2

Black and Decker JS660 Base Replacement: 步骤 2 中的图像 1，1

Use a screwdriver to remove the first screws securing the base to the jigsaw.
Remove the second screw.
Remove the base of the jigsaw.

步骤 3

Black and Decker JS660 Base Replacement: 步骤 3 中的图像 1，2

Black and Decker JS660 Base Replacement: 步骤 3 中的图像 2，2

With the old jigsaw base off, replace it with the new base by following the steps in the reverse order.
Assemble the base on a steady surface.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与8其他贡献者

Andrew Khouri

于02/08/16注册

468 声望

创作了4篇指南

+ 8更多徽章

团队

USF Tampa, Team 6-2, Eyestone Spring 2016 USF Tampa, Team 6-2, Eyestone Spring 2016 的会员

USFT-EYESTONE-S16S6G2

4 名成员

创作了4篇指南

0条评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 8

过去 30 天： 15

总计 503