简介

In this repair you will be using a chain cutting tool to reinsert a pin between two chain links, completing the chain.

工具

配件

无需配件。

Rout the chain around the front chain rings and rear derailleur. Pull the ends of the chain together.
  • Rout the chain around the front chain rings and rear derailleur.

  • Pull the ends of the chain together.

添加评论

Use the chain cutter tool to press the chain pin back through the chain link. If it is difficult to push it back in, the links are not aligned properly. Realign and try again if this is the case. Caution: Reusing pins in chains can cause the chain to fail.  This is because the pins are press fit into link.  Using a new pin when assembling a chain is recommend for long term use.
  • Use the chain cutter tool to press the chain pin back through the chain link. If it is difficult to push it back in, the links are not aligned properly. Realign and try again if this is the case.

  • Caution: Reusing pins in chains can cause the chain to fail. This is because the pins are press fit into link. Using a new pin when assembling a chain is recommend for long term use.

添加评论

终点

3等其他人完成本指南。

aaron thielk

于2010年10月10日注册

1,681 信誉积分

创作了5篇指南

团队

Cal Poly, Team 5-13, Maness Fall 2010 Cal Poly, Team 5-13, Maness Fall 2010 的会员

CPSU-MANESS-F10S5G13

4 名成员

创作了11篇指南

what do you do if the Chain keeps Falling off when your Riding the Bike an the Chain still rubs against the tire .

Anthony - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 24

过去的30天: 120

总计 12,554