简介

The LCD screen is the main display of the Audiovox CDM-8910.

  1. With phone in the flipped-open position, use a spudger to remove the four (4) rubber pads (one shown in red circle) located near the corners of the face with the LCD screen.
    • With phone in the flipped-open position, use a spudger to remove the four (4) rubber pads (one shown in red circle) located near the corners of the face with the LCD screen.

    添加评论

  2. Use a small Phillips head screwdriver to remove the four (4) screws exposed by removed rubber pads.
    • Use a small Phillips head screwdriver to remove the four (4) screws exposed by removed rubber pads.

    添加评论

    • Use a spudger to pry the front cover off of the phone, gradually working your way around the front face.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use a spudger to lift away and remove the metallic frame (in blue).

    • Use the spudger to lift away the two electrical contacts (in red).

    • Use the spudger to lift away the speaker (in yellow).

    添加评论

    • This is what the rear of the LCD screen should look like before proceeding. Note all necessary connections are undone.

    添加评论

    • Use a spudger to lift away the LCD screen.

    添加评论

    • LCD screen successfully removed!

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Kevin Jafarey

于2010年10月04日注册

11 信誉积分

创作了2篇指南

团队

Cal Poly, Team 3-24, Regan Fall 2010 Cal Poly, Team 3-24, Regan Fall 2010 的会员

CPSU-REGAN-F10S3G24

4 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 2,762