跳转到主内容

简介

Replacing the trigger button requires the removal of the controller back plate and the careful pulling of the trigger from its housing.

配件

没有特定配件。

  1. Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller. Lift up and remove the controller back plate.
    • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

    • Lift up and remove the controller back plate.

  2. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  3. With one hand, hold the controller down and with the other pull up on the lower clear plastic trigger housing  to remove it. With one hand, hold the controller down and with the other pull up on the lower clear plastic trigger housing  to remove it.
    • With one hand, hold the controller down and with the other pull up on the lower clear plastic trigger housing to remove it.

  4. Firmly grip the clear plastic trigger housing with one hand and use your other hand pull the black trigger button from its housing. Firmly grip the clear plastic trigger housing with one hand and use your other hand pull the black trigger button from its housing.
    • Firmly grip the clear plastic trigger housing with one hand and use your other hand pull the black trigger button from its housing.

结论

To reassemble your device, follow these instructions in reverse order.

Aj Coello

于2017年02月17日注册

633 信誉积分

创作了6篇指南

团队

USF Tampa, Team S19-G5, Hoffman Spring 2017 USF Tampa, Team S19-G5, Hoffman Spring 2017 的会员

USFT-HOFFMAN-S17S19G5

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 4

过去的30天: 15

总计 456