跳转到主内容

简介

Use this keypad replacement guide if buttons are missing or damaged. A potential hazard would be affecting the motherboard through the charge that you internally carry, therefore you should use the anti-static wrist strap to prevent this. References to the other guides will be used.

  1. ATT EL52300 Keypad/Plastic Display Screen Replacement, Battery: 步骤 1 中的图像 1,2 ATT EL52300 Keypad/Plastic Display Screen Replacement, Battery: 步骤 1 中的图像 2,2
    • Find the bump where the battery cover meets the phone. Put your thumb here, and push and slide the cover down.

  2. ATT EL52300 Keypad/Plastic Display Screen Replacement: 步骤 2 中的图像 1,1
    • Unplug the battery by squeezing your hands on the small white plug and lifting it up.

    • Do not pull on the wire itself because you might damage the wire!

    • The battery is now detached and ready to be removed by lifting it out.

  3. ATT EL52300 Keypad/Plastic Display Screen Replacement, Motherboard: 步骤 3 中的图像 1,2 ATT EL52300 Keypad/Plastic Display Screen Replacement, Motherboard: 步骤 3 中的图像 2,2
    • Remove the two 3.75 mm screws with a PH1 screwdriver.

  4. ATT EL52300 Keypad/Plastic Display Screen Replacement: 步骤 4 中的图像 1,2 ATT EL52300 Keypad/Plastic Display Screen Replacement: 步骤 4 中的图像 2,2
    • Use a plastic opening tool to remove the handset case.

    • Be careful to not lift the case too far as the ringer cable is attached to the case.

  5. ATT EL52300 Keypad/Plastic Display Screen Replacement: 步骤 5 中的图像 1,2 ATT EL52300 Keypad/Plastic Display Screen Replacement: 步骤 5 中的图像 2,2
    • Remove the two 3.65 mm screws on the motherboard with a PH1 screwdriver.

    • Use an anti-static wrist strap to prevent damage to the motherboard.

  6. ATT EL52300 Keypad/Plastic Display Screen Replacement, Keypad/Plastic Display Screen: 步骤 6 中的图像 1,2 ATT EL52300 Keypad/Plastic Display Screen Replacement, Keypad/Plastic Display Screen: 步骤 6 中的图像 2,2
    • The keypad lies on the top of the motherboard and is easily detachable.

    • Remove the keypad.

  7. ATT EL52300 Keypad/Plastic Display Screen Replacement: 步骤 7 中的图像 1,1
    • Replace the plastic display screen, or the keypad buttons as needed.

结论

To reassemble your device, follow these instructions in reverse order.

Katty

于2015年08月27日注册

313 声望

创作了3篇指南

团队

USF Tampa, Team 1-1, Sullivan Spring 2016 USF Tampa, Team 1-1, Sullivan Spring 2016 的会员

USFT-SULLIVAN-S16S1G1

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 7

总计 463