跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide is to remove the headlamp. Left and right remove identical. This will have to be done to either change a light bulb or to remove the complete headlamp for exchange.

工具

配件

没有特定配件。

  1. Here is the Jeep GC. Removal of the headlamp is identical for both sides. By opening the hood and looking straight down on the headlamp assembly, the 6mm hex head jack screw can be seen. Use a 6mm socket and nut driver to remove the jack screw. 1/4 socket will not fit 9/32 does, but it is a bit sloppy
    • Here is the Jeep GC. Removal of the headlamp is identical for both sides.

    • By opening the hood and looking straight down on the headlamp assembly, the 6mm hex head jack screw can be seen.

    • Use a 6mm socket and nut driver to remove the jack screw. 1/4 socket will not fit 9/32 does, but it is a bit sloppy

  2. Remove the long jack screw. Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward. Remove all bulb sockets from headlamp module. Separate headlamp from vehicle.
    • Remove the long jack screw.

    • Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward.

    • Remove all bulb sockets from headlamp module. Separate headlamp from vehicle.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

oldturkey03

于2010年09月29日注册

669,612 信誉积分

创作了103篇指南

It’s a 7mm socket

Don Marcos - 回复

Not on mine. Just rechecked and it is a 6mm on my Jeep

oldturkey03 -

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 13

过去的30天: 51

总计 5,425