跳转到主内容

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548 个问题 查看全部

Three beeps when power connected. Tried new RAM, more info inside.

No matter what configuration I have, the computer starts up when the power is plugged in. Without hitting the power button.

With the original 1GB stick of RAM in it, it gives 3 short beeps, 3 long beeps, then 3 short beeps. A short pause, then repeats. The internal diagnostic lights have 1, 2, and 3 on solid with each case.

I've tried many different types of RAM (all 1GB modules), and here's my results:

444MHz: 3 short beeps repeating

555MHz: sometimes 3 short, sometimes 3-3-3

666MHz and 800MHz doesn't give video or beeps, but does power on

I've also pulled the CMOS battery for 20 minutes and it resulted in no change.

I've used an air compressor to dust out the RAM slots as well.

Any help would be greatly appreciated.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
添加一条评论

2个答案

已选择的解决方案

https://discussions.apple.com/thread/367...

3 long tones, 3 short tones, 3 long tones Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details. Follow these directions for doing a firmware restoration: http://support.apple.com/kb/HT2213

这个答案有帮助吗?

得分 3

1条评论:

I didn't mention it above, but I did try that. It just continues to beep and after a few seconds ejects the disc.

Nothing shows up on the screen at all, in any scenario.

完成的

添加一条评论

replace the battery

that works for me and few others

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

comprenwilmington 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 924