声誉积分: 499.5千
35
342
977
Hard drives have a set of weakness as they have a motor to spin the platters and within the arm there is a solenoid to move the arm across the platters to then allow a very tiny set of magnetic heads to read the magnetic flux laid-out as a track (one per side times the number of platters) and one of these areas can fail and in doing so makes the drive not work.
Do you hear any noise when you first power up the drive? You should hear the spinning of the platters ramp up, then a click when the head assembly unlocks its self, followed by the sound of the head assembly seeking the inner track.
Do you hear these sounds and if not which.
这个答案有帮助吗？
过去 24 小时： 1
过去 7 天： 3
过去 30 天： 15
总计 117
2条评论
So the drives port logic is seen, but access to the data is not possible.
由 DanJ 完成的
@skippythescout "infinite loading with an error" what error do you get? You said it is an external drive. Have you removed the drive from the enclosure yet? Post an image of the labels on the drive with your question. 在已经存在的问题里加入图片
由 oldturkey03 完成的