声誉积分: 25
2
1
When Nintendo switch is powered "ON", displays nintendo screen, then switch screen. After it displays error code 2153-1540 and will not go past that. Hard reset will not work. Trying to go into recovery mode will not work. and taking it apart and disconnecting the battery for a bit, then reconnecting battery does not work. Cant find any info on the internet what could be the problem.
声誉积分: 14.7千
20
12
20
Hi Dan!
Regarding the comments, it could be that the RAM is faulty. This error is most of the time caused by that.
Best thing to do is to open it up and check if all is still looking OK or not.
Unfortunate everything is soldered on, so you need to desolder it. This requires soldering skills.
This guide: 任天堂 Switch 拆解 (step 11), shows where the ram is.
With this guide you can determine if you want to do the repair by yourself or not.
Good luck with the repair and let us know how it goes!
这个答案有帮助吗？
过去 24 小时： 2
过去 7 天： 16
过去 30 天： 22
总计 22
2条评论
Hi Dan! First things first, Is the Switch modded?
由 koppie007 完成的
@dan0 No mods. just regulary firmware updates
由 Dan Foster 完成的