Why analogue stick go up and down not left and right after repair?

Question

Xbox One 无线手柄 (Model 1708)

Xbox One 手柄在2016年随着 Xbox One S 的推出而问世，并增加了对 Windows 10/11 的蓝牙支持。该手柄修复了 Model 1537/1697 手柄上的许多设计缺陷，更加可靠。该手柄已被改进版 Model 1914 手柄所取代。

163 个问题查看全部

Taro @tarosquire

声誉积分: 13

1

发帖于: 2024年4月24日

更多选项

Why analogue stick go up and down not left and right after repair?

Just a quick one if anyone can help. Its about stick drift on this Xbox One controller. On the left stick after being replaced the drift disappeared. But another issue appeared, the stick on gamepad tester only goes up and down, not left to right.

I replaced another brand new analogue and still comes up with the same problem.

Any Ideas what this could be ?

Thanks,

Taro

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

1个答案

koppie007 @dan0 声誉积分: 12.8千 20 12 20 · Answer 1 · 2024-04-24T06:22:55-07:00

最有帮助的答案

koppie007 @dan0

声誉积分: 12.8千

20

12

20

发帖于: 2024年4月24日

更多选项

Hi Taro!

Did you replaced it with specific Analog sticks for the Xbox controllers? I know that also the PS4 ones fit and exactly look the same, but they can differ.

Here you can buy it: https://www.amazon.com/ElecGear-Replacem...

If you used those sticks, please replace the other stick as well and see what happens. Also re-check your solder work to make sure that all is OK.

这个答案有帮助吗？

是否

得分 2

5条评论:

Hello Koppie007!

I didn't expect a reply, nevermind a reply so soon!

That is interesting you mention that. I have a bag of analogs. I have checked the guide on amazon you sent me. It looks like I have only 1 XB1 analog and the rest are PS4 analogs. lol... when I get time tomorrow I will swap those analogs out and let you know the result.

Thanks for your time !

Taro

由 Taro 完成的 2024年4月24日

Hi Taro!

My pleasure! Glad that I could help :)! If you have any questions, just let me know! Good luck and let us know how it goes :D!

由 koppie007 完成的 2024年4月24日

Hello!

I managed to get round to doing it, great help it gave me some insight on different analogues. I did replace it with the right one (Gray under the bottom for Xbox one controller) Joints are all ok but it still seems to only go up and down not left and right =/. As far as my knowledge goes, would it be a faulty PCB possibly?

Many Thanks in advance,

Taro

由 Taro 完成的 2024年5月3日

@tarosquire It probably is a faulty circuit board if two or three different sticks have come up negative i belive there is a guide on how to replace the motherboard (Xbox One Wireless Controller Model 1708 Bottom Motherboard Replacement) and you might just have to do that

由 Hampter 完成的 2024年5月3日

Yeah, when you have replaced it multiple times now (for the correct ones), it must be motherboard related… sorry!

由 koppie007 完成的 2024年5月3日

添加一条评论

Xbox One 无线手柄 (Model 1708)

Why analogue stick go up and down not left and right after repair?

1个答案

添加你的答案