声誉积分: 1
1
Dear,
I have a LG short throw beamer (type PF1000U) and suddenly it stopped working.
Any bright ideas to help with this problem. Ventilators are clean, checked power cable, etc...
thanks for your answers in advance.
Rob
声誉积分: 4千
3
3
service manual is available here
https://elektrotanya.com/lg_pf1000u-na_c...
Not sure it will help you.
There is a chart on pg 18. About as far as you will probably get is to eliminate the adapter as the problem. Hopefully, that is what it is, because it would be easy.
If not, you would have to follow the schematic to locate a bad part. The chart only goes to assemblies, which would be a pricy repair.
这个答案有帮助吗？
Thank you very much! This is helpful.
I am afraid it's a bad part...
What part I’m having trouble too. It just stopped turning on all together
过去 24 小时： 0
过去 7 天： 1
过去 30 天： 11
总计 146
3条评论
@robinheymans "suddenly it stopped working." is not a whole lot to go by :-) what does or does it not,do? Any sign of life?
由 oldturkey03 完成的
@robinheymans Do you have a multimeter?
由 Andrew S 完成的
Thanks already for the replies. No sign of life at all. I do have a basic multimeter.
Don't think it is the lens because 30000 hours is not reached at all. So maybe the power cable or something inside is the problem?
由 robinheymans 完成的