声誉积分: 23
3
1
Sooo...
I was doing a shell swap on my ds lite and now the touchscreen doesnt work.
When changing the border around the bottom screen, a cleaar part came off with the border sticker which im guessing is the problem.
If anyone knows what happened can they please tell me wether i need to replace the screen or if its fixable with my current one.
Thanks to anyone who answers this.
声誉积分: 512
9
1
maybe you unplugged the digitizer or didn't plug it in at all,
这个答案有帮助吗？
THere was a clear sticker with a border and what looks like contacts under the border
Hmm I think you unplugged digatizer
声誉积分: 109
3
1
What you pulled off was the digitizer, I believe that all you need to do is reattach the digitizer which may require to be glued back down, check if the semi clear ribbon cable is still connected, if not then you have found the issue, please reply to this answer with a photo of the board on both sides.
Good luck
这个答案有帮助吗？
过去 24 小时： 1
过去 7 天： 7
过去 30 天： 12
总计 55
what do you mean a "clear part"
由 Sqwerks 完成的