跳转到主内容

型号:A1419/ 2012/2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 专业版

330 个问题 查看全部

27” 2012 iMac not power up - dead

After years of use, the device made an electronic noise while I was sat at the desk and immediately went off. Device will not power up now.

I’ve tried different power sources, holding in the power on, removing the RAM and replacing in various combinations.

It seems to be a power related problem but I’m not expert, welcome advice including ultimately where I can take for repair (Live in Lincoln, UK).

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1
1条评论

@joeemmerson when you say you've tried different power source, are you referring to different power supplies? That is what I would start with.

完成的

添加一条评论

1个答案

最有帮助的答案

The best shop in the UK is in Liverpool TheBookYard About a three hour drive for you. But well worth it! They maybe able to fix it as you wait.

这个答案有帮助吗?

得分 4

5条评论:

Thanks for the advice. Will keep in mind.

完成的

Thanks.

I did some further investigation as I have another iMac. Used the working iMac’s power cable on the poorly iMac and no joy. Used the poorly iMac’s cable on the healthy iMac and not joy. Also checked the fuse on the poorly iMac cable / socket and it had blown so perhaps pointing toward a power source problem on the iMac.

完成的

@y4ojv4wm5omavi - Yes, the internal power system is what I expect has failed. It sounds like the socket and/or cord has a short as well. Which explains the outlet fuse burning.

To test the bad cord use a Ohm or continuity meter to measure across the outlet pins with the cord unplugged fully.

There should be no connection across the plug pins 🔌 you may want to inspect the systems socket for burn marks as well as check the cords connection end to end from each line within the cord.

完成的

Oh wow! Never heard of them before, only a train ride away from Liverpool so I might give them a look 👀

完成的

Hi. Problem solved, https://computerclinik.co.uk from Lincoln were excellent in diagnoses and fix. Turns out after years of use the dust in the back had accumulated to such an extent the power source ultimately overheated. Replacement of this and everything is back as it was.

Thanks to all for suggestions.

完成的

添加一条评论

添加你的答案

Joe Emmerson 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 10

过去 30 天: 14

总计 73