声誉积分: 19
4
4
Hi all.
My iPhone 4s got wet the other day (not fully soaked or immersed but wet). It stopped working properly for a while but some time in a "Thirsty Bag" seems to have sorted it.
I would like to check the water ingress indicators; in case it plays up again I dont want to waste my time if the indicators have changed.
1. Where are they?
2. What do they look like a) when normal/ b) when water detected?
3. Photos would be appreciated.
Thanks in advance
声誉积分: 88.9千
203
262
144
There should be 3 in the phone. One in the headphone jack, one in the dock and some in the inside of the phone. If they're activated, they will be pink if they're lightly soakked and red if it was fully submerged.
To check the internal sensors, you're probably going to need a pentalobe screwdriver. This is the driver you need.
这个答案有帮助吗？
my iphone still works but i dont have sound. i looked down the headphone jack andd it is pinkish white/red. how can i fix this
这个答案有帮助吗？
You cant without replacing parts
the 'pinkish white/red' is the water damage indicator.
even if you do, the board itself may also be damaged.
过去 24 小时： 0
过去 7 天： 4
过去 30 天： 7
总计 21,277
1条评论
Well I sent it to Apple and they replaced it so the question is now moot. Next time it's an Aquapac for me when out hiking.
由 Ernie K 完成的