Black wide band on screen after display replacement

Question

MacBook Pro 13" Function Keys 2017

A1708/EMC 3164—于2017年6月上市，这台入门级MacBook Pro保留了它的传统功能键（相对于OLED触控条）。

563 个问题查看全部

ORI @masa

声誉积分: 23

1

发帖于: 2022年6月29日

更多选项

Black wide band on screen after display replacement

Hi,

I just replaced the broken display (dropped) to a new one and the result was as in the photo.

The display with a wide black band at the left center.... I checked again the connectors by disconnecting and reconnecting again but no change.

An external display shows perfectly and therefore no issue on GPU, if I understand well.

I also called the shop where I bought the display (Ali Express), but they said the display was passed their inspection correctly.

I will try to replace the flat display cable, but anything else should I do? Any suggestion please?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

2个答案

已选择的解决方案

Dan @danj

声誉积分: 479.7千

Self employed contract worker

35

329

971

发帖于: 2022年6月29日

更多选项

Ouch! Not good ;-{ You need a new display assembly as something heavy was pressed on the lower edge of the lid or the system got a good bang along it. Basically, the vertical data lines within the LCD got damaged which tells the black areas pixels to light.

Here's the needed pat MacBook Pro 13" Retina (Late 2016-2017) Display Assembly and the guide to put it in 2016后期带功能键的13寸MacBook Pro显示屏组件更换

产品

MacBook Pro 13" Retina (Late 2016-2017) Display Assembly

$454.99

这个答案有帮助吗？

是否

得分 1

3条评论:

Thanks for your comments.

I understand that it should be the display which I bought was already broken, most likely due to the transport.

Do you think it may be possible to fix it by replacing the main display cable (a short flat cable between the logic board and display connector board)?

Anyway I will return this display to the seller to obtain a replacement.

由 ORI 完成的 2022年6月29日

@masa - The short iDP cable does not carry the discreet Horizontal & Vertical signals. The cables which exit the small T-CON board to the LCD is the cables that are damaged and these are bonded to the LCD glass panel and can't be replaced. Hence, the need for a complete assembly here.

Think how the fabric is woven with the Warp and Weft here we have lost the vertical signal lines within the blacked out section of the LCD.

由 Dan 完成的 2022年6月29日

Thank you very much for very precise and professinal answers!

由 ORI 完成的 2022年6月29日

添加一条评论

Thanks for your comments.

I understand that it should be the display which I bought was already broken, most likely due to the transport.

Do you think it may be possible to fix it by replacing the main display cable (a short flat cable between the logic board and display connector board)?

Anyway I will return this display to the seller to obtain a replacement. — ORI
@masa - The short iDP cable does not carry the discreet Horizontal & Vertical signals. The cables which exit the small T-CON board to the LCD is the cables that are damaged and these are bonded to the LCD glass panel and can't be replaced. Hence, the need for a complete assembly here.

Think how the fabric is woven with the Warp and Weft here we have lost the vertical signal lines within the blacked out section of the LCD. — Dan
Thank you very much for very precise and professinal answers! — ORI

Mindaugas Padvelskis @komota 声誉积分: 85 A. Padvelskio firma "Komota" 2 · Answer 1 · 2022-06-29T05:05:20-07:00

最有帮助的答案

Mindaugas Padvelskis @komota

声誉积分: 85

A. Padvelskio firma "Komota"

2

发帖于: 2022年6月29日

更多选项

based what it is showed, I think, it is display issue. GPU for sure no because usually all screen will do something. Could be display cable also. But if you bought assembly they come with cable

这个答案有帮助吗？

是否

得分 2

添加一条评论

MacBook Pro 13" Function Keys 2017

Black wide band on screen after display replacement

2个答案

MacBook Pro 13" Retina (Late 2016-2017) Display Assembly

添加你的答案