修复你的物品 社区 商店
加入维修社区 - 创建账户

发布于2018年9月21日，型号為 A1920、A2097、A2098、A2099、A2100。可選GSM/CDMA，eSIM/nano-SIM，64GB/256GB/512GB，銀色/金色/太空灰色。讀法是“iPhone Ten S"。

20 个问题 查看全部 | 37配件 购买

更多选项

Battery doesn't charge after battery replacement

I replaced the battery in my iPhone XS, and all seems to be well, however the battery does not charge.

The phone recognises that a power source is connected through the tone (both through using the lightning port or charging pad), however the battery icon does not change to the battery icon superimposed with the spark.

The battery is also stuck at 0%. I can boot the phone ok, but it shuts down after a few minutes if I do something that draws more power.

In the end, I did a DFU restore to rule out any software issues, however this has not solved the issue.

Anyone seen a similar issue?

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

It could have have a damaged connection on the battery I would take it off and check the connections and clean the connectors. Also check the capacitors next to the battery connector. You should also check the lightning port. Here is a video that shows what I was talking about.

https://youtu.be/nsMl-_Q7cms

这个答案有帮助吗？

是 否
得分 2
添加一条评论

更多选项

maybe get a technician to check or even replace the charging form

这个答案有帮助吗？

是 否
得分 1

1条评论:

Thanks for the pointers - I think I've narrowed it down to either:

1) damage somewhere on the logic board, perhaps a missing capacitor, as mentioned on the link that @barriphone shared.

2) a defective new battery

Either way, I can't validate the battery, and don't have the kit to do any micro-soldering so I've had to drop the phone off at my local technicians. I'll hear back from him tomorrow.

由完成的

添加一条评论

添加你的答案

ap0phi5 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 9

总计 393