修复你的物品 社区 商店

Model A1297 Unibody: Early 2009, Mid 2009, Mid 2010, Early 2011 & Late 2011

544 个问题 查看全部

更多选项

Laptop turns off after loading bar during booting process

Found this issue on my 17” 2011 MacBook Pro:

  1. Press power button, no response, and nothing happens.
  2. Press shift + control + option together, laptop turns on, can see Apple logo and loading bar, but no Apple chime sound.
  3. Laptop turns off right before loading bar completes(about 3 to 4 seconds).
  4. Disconnect the battery, get the power adaptor connected, and repeat #1. #2 and #3 above, same symptom.

What could be wrong, GPU failed on logic bard or something else?

Many thanks,

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

Points #2 and #3 perfectly match with a faulty GPU. Point #1 is a bit unusual, but one never knows what a faulty GPU may cause, a bit of testing would be needed to confirm. You can try google “Macbook Pro GPU disable”, there are several tested solutions, software, hardware and hybrid to run the machine with only the Intel HD3000 graphic if that is acceptable for you. Since it doesn’t seem to even boot, you’ll probably need a Linux boot distro in any case to have the Mac boot.

Or you could try “baking” the board, that may buy you some time although it’s not a long term solution. I would avoid throwing money on a GPU replacement, unless with a well reputed and honest lab.

这个答案有帮助吗？

是 否
得分 1

6条评论:

@arbaman - Thanks, will try that "baking" solution.

由完成的

@arbaman - Hi, just checking, should Apple self-diagnostic program report anything if GPU failed? I tried to run it, simple and extensive testing, both passed. Any thoughts?

由完成的

@lovecd Not been dealing with A1286 for some time, but as far as I remember AHT doesn't report anything abt GPU failure, probably it doesn't even test it.

由完成的

@arbaman - I see. By the way, just checking, for "baking" method, did you put the whole logic board into oven or use heat gun to "bake" the GPU unit only?

由完成的

@lovecd I don't own a faulty 2011 MBP, I do repairs for customers and as I said initially, consensus in the community is that baking isn't a repair. Thus I don't bake boards either way.

由完成的

显示更多的1条评论

添加一条评论

添加你的答案

Tom 将永远感激不已
浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 6

总计 63