跳转到主内容

苹果公司的 2021 款 iPhone 于 9 月 24 日发布,配备 6.1 英寸 OLED 显示屏、双 1200 万像素摄像头系统和五种可选颜色。该手机为 iPhone 12 的继任者。

95 个问题 查看全部

Can I replace the camera module with the iPhone 13 Pro camera module?

I want to do 3D photography, mainly for preservation and archival of actual places so future generations can view them. But I got this. The second-worst phone of 2021 (mini is worse) because it runs iOS, and because it doesn’t allow LiDAR. For me, iPhone 13 Pro is just a 3D scanner. And iOS is just a dumb firmware. So this phone is literally a 3D scanner without the 3D scanner. Can I replace the camera module with the pro one?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
1条评论

why you would do that

完成的

添加一条评论

2个答案

已选择的解决方案

Sadly, no. The 13 Pro has 3 camera lenses and the 13 only has 2, so no way to fit it into the housing without modification. Additionally the camera assembly from the 13 uses 1 cable (and connection to the board) and the 13 Pro uses 2. I suppose there may be a way to modify it to work, but it would require a lot of knowledge. So I would say it’s maybe possible, but realistically, it’s not practical.

Cameras are also paired to the logic board starting with the 12 series and if I recall correctly swapping camera modules even within the same model caused the cameras to not work properly or at all.

这个答案有帮助吗?

得分 4

2条评论:

But does the LiDAR sensor work

完成的

The LiDAR sensor is actually a separate module altogether and is not physically integrated into the camera at all. It even has its own connector to the board. It likely also has dedicated components on the logic board which would be absent on the vanilla 13 Pro. So. No. Not in any practical way.

完成的

添加一条评论
此回答最初是针对另一个问题

No, you don’t. Don’t expect iPhone to be moddable.

这个答案有帮助吗?

得分 3
添加一条评论

添加你的答案

The Mariocrafter 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 8

总计 209