iPhone unable to activate, NO IMEI + continous searching.

Question

iPhone X

发售于2017年11月3日。型号为 A1865, A1901。有 GSM 或者 CDMA 网络制式可选。提供64或者256GB 的存储空间。提供银色和深空灰色。（读音与“iPhone 10”相同）

1202 个问题查看全部

Kaspar @kapuzta

声誉积分: 1

4

3

发帖于: 2021年9月7日

更多选项

iPhone unable to activate, NO IMEI + continous searching.

Hello.

I have recieved iphone x with light water damage.

When i power uo the phone and click the i button there is IMEI shown and after trying to activate it - The result is “Unable to activate” and after that the IMEI is gone.

Phone wont recognize the SIM aswell - continous searching..

Anyone have experienced similar case?

Now i discovere one thing.

When doing flash with 3utools there comes an error up 80% (Device did not accept baseband).

That rules out that the problem is with BB? BB CPU ?

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

Hello.

Little update :

IMEI is present sometimes in the "i" section and i can see it in 3utools aswell.

That means baseband is still functioning?

由 Kaspar 完成的 2021年9月12日

添加一条评论

3个答案

Hello.

Little update :

IMEI is present sometimes in the "i" section and i can see it in 3utools aswell.

That means baseband is still functioning? — Kaspar

Chris Stables @imicrosoldering 声誉积分: 50.7千 8 14 101 · Answer 1 · 2021-09-07T15:27:10-07:00

最有帮助的答案

Chris Stables @imicrosoldering

声誉积分: 50.7千

8

14

101

发帖于: 2021年9月7日

更多选项

You will need to split the board and check for corrosion and oxidisation from the liquid. Clean the pads and install into test jig. If it still has no IMEI you will have to consider re-balling “Baseband CPU” and the” U_WTR_E” IC.

这个答案有帮助吗？

是否

得分 1

1条评论:

The board is already splitted. No corrosion there at all.

由 Kaspar 完成的 2021年9月7日

添加一条评论