修复你的物品 社区 商店

Guides and support for devices that play video from Blu-Ray Discs.

110 个问题 查看全部

更多选项

Sony UBP X800 - Won't power on

Hi,

I’ve been trying to fix this device for some time and got some very helpful comments on another platform but that’s dried up so hoping I can get some pointers re where to go next :)

TLTR - I’ve pretty much eliminated the power module as the source of the problem as power seems to be leaving the board via 2 power cables to the mainboard.

I’m sure now its something on the motherboard but not sure what to check. Long shot I know, but if anyone has some ideas I can try, that would be greatly appreciated.

Thanks

Block Image

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
2条评论

@ragnarmop if you already ruled out the PSU we need to see the rest of the boards and we would need to know what you have already checked. That way we do not repeat unnecessary steps.

由完成的

Hi there

I also have a completely dead UBP-X800. Just died while using the wifi. If you have a solution yet, PLEASE let us know, it would be appreciated.

由完成的

添加一条评论

4个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Gonna close this down now as I am pretty certain we can’t go any further. I am 98% certain that the fault is on the logic board and that is not a part I can either fix or replace as Sony no longer supply them. Oldturkey03, many thanks for your help! Stay well :)

这个答案有帮助吗？

是 否
得分 0

1条评论:

Just to say my UBP x700 has same problem. A repair centre has told me it’s the board and £200 to repair so that’s the end of that.

由完成的

添加一条评论
最有帮助的答案

更多选项

@ragnarmop start by following the troubleshooting flowchart. Let us know what you find out.

Block Image

Block Image

Block Image

Update 07/29/2021

@ragnarmop you are giving up to early :-) I finally got my hands on the complete service manual. Use that to complete the troubleshooting. ==>>Slide 1<<==

The schematic is a bit weird to look at. It is in layers and I am not sure how to open the individual layers in a PDF and have not had time to play around with it. It’s getting a bit crazy at work….again.

Don’t give up yet!

这个答案有帮助吗？

是 否
得分 3

20条评论:

Hi!

Thank you for the flowchart. I’ll crack on and see what I find.

Regards!

由完成的

Hi,

I should have mentioned that I’d bought a new power board and tried that but the player did not respond.

With the old board in place, I got the following result when testing the IC101: Testing voltage between pins 5 and 1 = 213V… Will keep testing.

由完成的

Testing continues :)

Check power throughput from the board to CN202

With the device connect to mains, I checked pins 6 and 4 and there is no power getting to these pins. Its odd, When I tried the new board, it also did not return the player to life which suggests there’s something downstream perhaps? But why would there be no voltage showing on those pins if the problem was further down…… (thinking out loud here :) ) I have very little experience with electronics so everything is a first for me.

由完成的

@ragnarmop did you check IC401 pin 4 and did you get 1.8V?

由完成的

I found what I think you are referring to on the MB. Testing now.... I get 000 Volts at pin 4

由完成的

显示更多的15条评论

添加一条评论

更多选项

I don't think they intended it to be fixed at all, even the service manual does not mention anything about it.

I think the best and easiest way is to use an external power supply or a power brick, doesn't matter, as long as it's 12V and 2A and above, this should do the job.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

Check this ,I change it ,and work well.

Block Image

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

RagnarMop 将永远感激不已
浏览统计数据:

过去 24 小时： 5

过去 7 天： 33

过去 30 天： 127

总计 4,412