跳转到主内容

Model M6497 or A1005 / 500, 600, 700, 800, or 900 MHz G3 processor

117 个问题 查看全部

Will not boot form any drive

Just got this G3. I knew that it might have hard drive issues, so I plugged in my external firewire, and started holding down my option key. I selected the external drive, but when I clicked the arrow, the screen just blinked and nothing happened. The external drive boots other similar macs just fine, so I assume it is not the drive. Also tried several other install CDs, but again the machine will just not boot.

I connected to this mac in target mode from another mac and reformatted the HD and installed 10.3, but when I restarted, I just got a flashing question mark. I read somewhere that it could be corrupt firmware. I am not sure how to fix that. Any ideas would be appreciated.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
1条评论

Please tell me about the machine you are installing from and if your 10.3 is a retail version.

完成的

添加一条评论

1个答案

已选择的解决方案

Thanks for your interest. I just resolved the issue. Turns out that this G3 500 Mhz only had 64MB of RAM onboard and was not enough to boot into OS X. I added additional memory and the problem was solved.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

studio58 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 607