修复你的物品 社区 商店

发布于2018年10月26日。型号A1984，A2105，A2106，A2108。 提供GSM或CDMA / eSIM，nano-SIM或双SIM / 64,128或256 GB /黑色，白色，蓝色，黄色，珊瑚色或红色。 （发音为“iPhone 10 R”）

20 个问题 查看全部 | 26配件 购买

更多选项

Firmware Restore Problem iPhone XR

Hello. I am trying to restore the firmware on my iPhone XR. I start up the iphone it goes straight into restore mode. I try restoring the firmware from restore and dfu mode. It says preparing iphone for restore. After it says iphone is restarting it restarts and goes straight into recovery mode again. I’m thinking it is a hardware issue. I may be wrong. If it is a hardware problem what part do i need to repair. The front and back screen is cracked. I don’t know if that affects the restore process. If anyone can help me that would be great.

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

Did it get wet? If the back or screen is cracked liquid can come in. I would open it up and check if it has liquid damage and go from there.

Update (05/14/2020)

It sounds like you need to send it to a repair shop. I would recommend jessa at ipad rehab ipadrehab.com or Jason at sts telecom ststelecom.com you should check out there YouTube channels. But they can figure it out. Hope I

这个答案有帮助吗？

是 否
得分 0

1条评论:

I am not sure. If i open it up what do I check for if there is water damage? Also I heard that it could be a faulty part in the iPhone. What part or parts could cause that?

Thanks

由完成的

添加一条评论

更多选项

Try to disconnect the front cam flex cable, rear cam flex cable and lcd flex cable you only connect battery and dock connector flex to mother bord and then connect the iphone with itunes. If it boots up you can conect flex cable one by one to check which part give the error when connected to motherbord.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Kevin Greaves 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 4

总计 242