跳转到主内容
加入维修社区 - 创建账户

发布于2018年9月21日,型号为A1921,A2101,A2102,A2104。支持GSM,CDMA / eSIM或 nano-SIM / 拥有64,256或512GB容量可选 / 有银色、金色、深空灰可选。(读作iPhone 10XS Max)

touch is not working

Hello I cracked my phone and the touchscreen features suddenly stopped working about two hors after that. The image displays fine and everything else seems to be working fine is there any way I could maybe fix this at home as a lot of places are closed around me.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

You’ll have to replace the screen as the digitizer is damaged. It looks like ifixit only has the LCD kit which I highly advise against because that phone uses the more efficient OLED panel and the connectors are not designed to handle the extra current LCD panels will draw. That leaves you with the hard or soft OLED. For best quality I recommend soft because that’s what apple uses. The hard OLED is cheaper but it is more brittle and you’re more likely to damage the OLED panel before breaking the glass. Here’s a link to a reputable supplier but you’ll need to buy the tools to fix it: https://www.mobilesentrix.com/replacemen...

You’ll also need to get a toolkit to fix it. Keep in mind that when you replace the display it will pop up with a message saying “apple cannot verify a genuine apple display has been installed on this device”. That is nothing to be concerned about so long as you use a quality part.

这个答案有帮助吗?

得分 0

4条评论:

You want to be very careful disconnecting the earpiece speaker/proximity sensor cable because it is glued down. You will probably have to put a little heat with a hair dryer or a heat gun. Use a plastic spugger and carefully pull up the cable. These wires are very fine and easy to tear so be careful. If you damage the cable you face Id will no longer work.

完成的

@barriphone yes I forgot to mention that. Don't use metal pry tools around the connectors either!

完成的

And use use the hair dryer or heat gun to heat up the sides of the screen to release the adhesive. Pry the screen up from the bottom left half and once you have a opening just enough to get a guitar pick, a playing card use it to go around the sides and top to cut through the adhesive. Once you open the screen open it like a book from left to right.

完成的

@hootonberg always plastic spugger. It wouldn't hurt them to use a razor blade to get a gap when taking the screen off since they are going to replace it. I doubt he is going to have it refurbished. So he doesn't have to worry about damaging it. What part of the country is your business,?

完成的

添加一条评论

添加你的答案

guess who 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 2

总计 442