No battery detection with new Logic Board

Question

MacBook Pro 13" Function Keys 2017

A1708/EMC 3164—于2017年6月上市，这台入门级MacBook Pro保留了它的传统功能键（相对于OLED触控条）。

563 个问题查看全部

BenjaminS @benjamins47711

声誉积分: 71

5

4

发帖于: 2019年12月13日

更多选项

No battery detection with new Logic Board

Hi I have a A1708 with function keys. After dead logic board I ordered a used one of eBay. Replaced and booting up. First completely erased disc and made full install of delivered high Sierra. Then I saw that no battery is detected (PPT001 in diagnose). Boots up and schows 100% and X in battery symbol. At a short moment it showed battery 0%. Made SMC reset…nothing. High chance of high discharged status of the battery but my usb c tool only shows 0,5A when running…so it’s definetely not charging.

what is the problem with “new” logic board and old battery ? Is there any workaround? Thx on advance

Looks like there is something wrong with dates?

Had the Problem with date at new installation of High Sierra with “CERT” failure because date was set to 19xx.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

9条评论

Run CoconutBattery and post a snapshot here for us to see 在已经存在的问题里加入图片

由 Dan 完成的 2019年12月13日

Does coconut Display different results than System report? System report says no battery detected

由 BenjaminS 完成的 2019年12月13日

It offers a better view and boils it all down into a more compact screen. Please let's see what it shows us.

For reference: Battery suddenly not recognized. MBP Fn 2017 which has a similar problem.

由 Dan 完成的 2019年12月13日

Posted it down below. Strange thing is, when I start up and the apple logo and statusbar is on screen and I pull the cord, then it loads till system is "up"...then it shuts off.

由 BenjaminS 完成的 2019年12月14日

@BenjaminS - This makes sense! When you disconnect the USB-C power cable the system looses its settings so the date reverts to the default 1979.

由 Dan 完成的 2019年12月14日

显示更多的4条评论

添加一条评论

3个答案

已选择的解决方案

BenjaminS @benjamins47711

声誉积分: 71

5

4

发帖于: 2019年12月20日

更多选项

Thank you dan for your advice.

SOLVED:

It was the “Data-Cable” which connects Battery and Main Logic-Board. Just replaced it with a new one and its working again.

这个答案有帮助吗？

是否

得分 1

添加一条评论

Run CoconutBattery and post a snapshot here for us to see 在已经存在的问题里加入图片 — Dan
Does coconut Display different results than System report? System report says no battery detected — BenjaminS
It offers a better view and boils it all down into a more compact screen. Please let's see what it shows us.

For reference: Battery suddenly not recognized. MBP Fn 2017 which has a similar problem. — Dan
Posted it down below. Strange thing is, when I start up and the apple logo and statusbar is on screen and I pull the cord, then it loads till system is "up"...then it shuts off. — BenjaminS
@BenjaminS - This makes sense! When you disconnect the USB-C power cable the system looses its settings so the date reverts to the default 1979. — Dan

Dan @danj 声誉积分: 479.8千 Self employed contract worker 35 329 971 · Answer 1 · 2019-12-14T09:45:05-07:00

Dan @danj

声誉积分: 479.8千

Self employed contract worker

35

329

971

发帖于: 2019年12月14日

更多选项

You need to replace the battery as the micro controller within it is not working so its not charging properly. Here’s the needed part MacBook Pro 13" Retina (Function Keys, Late 2016-2017) Battery you’ll need to reference this guide 替换MacBook Pro 13‘’2016年末期带功能键版本的电池

产品

MacBook Pro 13" Retina (Function Keys, Late 2016-2017) Battery

$129.99

这个答案有帮助吗？

是否

得分 1

5条评论:

Are you sure ? Before replacing the Board everything worked fine. Are there any probe points or another way to test the battery? When I measure simple at the two contacts on the Battery board I get 5,8 V ...seems a little to low? Does anyone have voltages to test ?

由 BenjaminS 完成的 2019年12月14日

Sorry you've damaged it somehow.

由 Dan 完成的 2019年12月14日

Starting in single user mode and pulling cord stays on. Only when exit single user mode shuts off

由 BenjaminS 完成的 2019年12月15日

OK, so what does CoconutBattery say in Single User?

由 Dan 完成的 2019年12月15日

@BenjaminS - Happy it all worked out! Don't forget to score the answer and accept it so its closed out.

由 Dan 完成的 2019年12月20日

添加一条评论

Christophe @agredach 声誉积分: 1 · Answer 2 · 2020-10-23T06:00:37-07:00

Christophe @agredach

声誉积分: 1

发帖于: 2020年10月23日

更多选项

Hi, lately I installed an NVME M.2 ssd and after unplugging the battery board data cable I ripped of the head. After installing everything and plugging everything the MacBook don't start anymore with the battery and it doesn't show up on the sidebar. I ordered a new battery board data cable and plugged that won in with no results. Am I missing something ?? any setting ?? or manipulation ?? I did everything step by step. Please help !!

这个答案有帮助吗？

是否

得分 0

1条评论:

@agredach - Best to create a fresh question. This series uses a custom SSD it does not offer a M.2 interface for a M.2 SSD.

由 Dan 完成的 2020年10月23日

添加一条评论

MacBook Pro 13" Function Keys 2017

No battery detection with new Logic Board

Update (12/14/2019)

3个答案

MacBook Pro 13" Retina (Function Keys, Late 2016-2017) Battery

添加你的答案