I changed a new hard drive
Western Digital Scorpio Blue 80GB 8MB 5400rpm 2.5" to my Powerbook g4.
I then tried to install Leopard from installation disk but it doesn't seem to work.
Install starts if I keep "alt" button on when booting.
Then comes
See fotos from
www.raisanloma.kuvat.fi
Then the cd driver starts to make a crackling noise which don't stop until I shut down power.
What to do
声誉积分: 20.7千
86
89
33
As far as I know that machine accepts Leopard, so I would venture to guess that your superdrive is to blame here. If you have a USB Flash drive, try creating an image of the install disk and install through USB. Not sure if this machine can boot from USB, but it's worth a shot. You can also try to use an external CD/DVD drive if you have one available. Just took a look at the pics in your link and I have to ask: has this machine displayed this behavior before? Why did you change the previous HD?
这个答案有帮助吗？
+ Target Mode
Yes this machine has displayed this behavior before. After I couldnt open it at all. How to boot from USB?
过去 24 小时： 0
过去 7 天： 2
过去 30 天： 3
总计 661
2条评论
Yes this machine has displayed this behavior before. After I couldnt open it at all.
How to boot from USB?
由 Samuel wasy 完成的
Your computer is a PPC and won't boot from USB. You need to boot from Firewire.
由 rj713 完成的