跳转到主内容

2015年3月更新的 13 英寸 MacBook Pro 配备 Retina 显示屏,型号为A1502,采用第五代英特尔酷睿 i5 和 i7 处理器,并配备 Force Touch触控板。

MacBook doesn't turn on pressing the button

as the title suggests, the macbook does not switch on unless I disconnect and reconnect the battery and then plug in the power cord. I thought it was a defect of the power button, but when the computer is on it works by activating the shutdown window. so I would exclude a keyboard defect, is it possible that the problem is in the on/off circuit? how can i verify that this is the case? what else can determine this behavior?

ps: I tried the various reset procedures but they don't work (the led on the power connector does not change color)

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

已选择的解决方案

Led color not changing when trying to reset SMC and power button not working point to a charging circuit fault. If you have a multimeter you can probe the charging connector pins and post the outcome of your measurement, but it seems you’ll need a board repair or replacement.

这个答案有帮助吗?

得分 3

4条评论:

But the mac charges fine. The battery goes up to 100% and it works when unplugged

完成的

@Giacomo Zema The full name of the circuitry is "PBus supply and battery charger" to be precise. It consists of a number of components and needs the aid of SMC to work properly. Unless there's a major fault shutting down the full circuitry, it may happen that parts still work fine while others stop working, as it seems to be the case with your Mac. Whether the issue is caused by the SMC or by another component on "PBus supply and battery charger" or sensing, as more often happens, it can't be figured out without thorough testing.

完成的

Ok I think it might be it. The keyboard is not faulty since when i press the power button when the computer is on it registers it. The problem occurs when it is switched off. So I figure it is that part of the circuitry that is involved. How can I investigate further? Should I take it apart? Inspect the motherboard? I already took the bottom cover off and did not notice any inconsistency on the logic board

完成的

@Giacomo Zema A visual inspection would be a good idea to start with, better with the help of a good light source and some magnification. Then I'd check all the SMC_ONOFF_L circuitry and then jump to PBus supply and battery charger and finally the SMC itself.

完成的

添加一条评论

When you mean activating shut down window, is this via the power button key on the keyboard or is it via pressing the shut down on the top left apple menu?

If it is the latter then it's most likely going to be a keyboard problem, make sure to test every key on the keyboard too.

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

Giacomo Zema 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 3

总计 114