跳转到主内容

Repair and disassembly guides for Kenmore Microwaves.

182 个问题 查看全部

Microwave shuts off intermittently, already replaced door switch assem

I have a model 401.80082700 serial 725MM00044. Intermittent problem. Microwave goes through heating cycle and then totally powers off…no display, no light, no power. After 15-30 seconds the display comes on and instructs to press clock and reset time of day. After doing so the microwave is fully functional and may operate several times before powering off again. Occasionally the display appears fainter than normal, esp the center of display. I have replaced the door switch assembly but after several days the intermittent problem has returned. What do you think? TY

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 3
1条评论

After much delay and frustration I ordered and replaced the control board…..works great…..thanks for your recommendation!

完成的

添加一条评论

2个答案

已选择的解决方案

Sounds like the problem is the control board, not the door assembly. Try replacing the main controller circuit.

Good luck!

这个答案有帮助吗?

得分 1

1条评论:

I have the same problem with my Kenmore microwave. Is this the part I need? https://www.searspartsdirect.com/product...

完成的

添加一条评论
最有帮助的答案

There are two parts to that door switch, here they are on your model along with how to test them:

https://www.repairclinic.com/RepairHelp/...

这个答案有帮助吗?

得分 2
添加一条评论

添加你的答案

Ken Thome 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 9

过去 30 天: 24

总计 1,054