跳转到主内容

发布于2016年3月,是一款同时拥有着iphone 6s般的硬件规格以及4英寸屏幕体积的iPhone。有深空灰色、银色、金色及玫瑰金色四种配色以及16/64GB容量可选。国行型号为A1723和A1724。

966 个问题 查看全部

Why is my se restartint and having low battery life after screen repla

My Iphone se is having issues. It was working fine before the screen cracked I replaced it and it worked fine until that screen stopped working i replaced it again and it started restarting every minute non stop so i thought it was a screen so i get a complete screen from ebay and it works fine but it keeps restarting at the apple logo reallt fast then after a few restarts it'll finally boot up but either be at 1% and wont chargw up or 100% and if i take it off the charger at 100% itll just die and restart at the apple logo. Any ideas ? Bc of the after market screen or my battery? My battery by looks is mint and is not buldged or anything in the settings Battery Health it says to Service battery and This Iphone is unable to determine battery health.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

最有帮助的答案

Sounds like a small component right above the battery connector was knocked off when unplugging the battery. Very common to happen when a prying tool is not used carefully to unplug battery.

It will require someone with micro-soldering to replace that component which is responsible for reading the information from the battery.

When the phone can't read the battery properly it will cause random rebooting and unstable battery percentage.

这个答案有帮助吗?

得分 2

评论:

Cant be battery was never touched.

完成的

Battery should be unplugged when doing screen replacements, not good to have live power running to the screen connectors when unplugging / plugging in the screen.

完成的

True, very dangerous game for iPhone's health working with battery there. Sounds like battery is now dead or even worse, charging circuit damaged.

完成的

Not touched In the way that any components would be damaged

完成的

It's hard to spot the damaged or missing component above the battery connector without a microscope but the symptoms are exactly the same as seen in this thread:

iPhone SE Stuck at 1%

In your case it could be actually just dislodged and just needs to be resoldered as you've said there's no missing component above that connector with the naked eye.

完成的

显示更多的5条评论

添加一条评论

添加你的答案

dj holley 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 81