跳转到主内容
加入维修社区 - 创建账户

Toyota's fifth generation Pickup

Check engine light staying on. Code31&41

I have 91 pickup 22re. When code 31&41 hit me it made it run bad and now fuel pump will only work if I put a ground wire on green &yellow wire going into the open relay.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0

2条评论:

31 is vacuum sensor signal

41 is throttle position sensor signal

Im not sure how these are related to the fuel pump issue.

完成的

well thats what is going on. I have to ground my yellow green wire to my relay to get fuel pump to wotk. Its runs bad. 31&41 are still there. O need some help on this please

完成的

添加一条评论

1个答案

The fuel pump relay on 90s pickups are located UNDER the dash ABOVE the ecu or computer. It's a black relay usualy with a little metal bracket attached to it. You have to take out the kick panel on the passenger side of coarse the glove box has to come out and you should be able to see it tucked up in there above the computer and is held in by 1ea 10mm bolt. If you disconnect and get it off give it a little shake. If it sounds like a baby rattle it's most likely shot and is probably full of rust and broken bits and peices. It's worth buying a new one as its probably the original one that came off the line. I just bought one from oriellys last week was $50 but dont try to stick other relays you might have on hand. I tried and got curious and all off a sudden my truck wouldn't start at all. Went back and forth for a few weeks before I realized the spare fp relay I tried to put it blew the fuse to the fuel injection or the 15amp efi fuse under the hood. Good luck hope this helps.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

winemanhoward 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 5

过去 30 天: 27

总计 183