声誉积分: 11
1
After 1.5 years back i’ve damaged cord from the screen to monitor while installing SSD this issue suddenly happens to me.
Any ideas what this could be and how to fix it?
Video and picture attached.
I’ve used tools from Ifixit. But didn’t brought new stretch to keep monitor in safe and that it dropped, glad I’m able to catch it.
strange since it last 1,5 years after that accident.
Will try to replace cable first.
Thanks!
声誉积分: 421
4
First things first. Check that you properly inserted the display cable. Even if you did check again. If in fact you did damage the Display Data cable then you should not power on your iMac any longer because you could be sending voltage to places it’s not suppossed to go. Luckily the guys here @ifixit.com can get you a replacement and show you how to do it too.
iMac Intel 27" EMC 2546 & 2639 Display Data Cable
In my experience what you’ve shown in the pics looks more like a display issue instead of a cable but I’d first replace the cable! Happy fixing!
这个答案有帮助吗？
@iheartmacs - I don't think the cable will help here ;-{
@danj true. It doesn't help :(
声誉积分: 479.4千
35
329
971
I fear you damaged the display when you took it off. This can happen if you don’t use the correct tools and/or force things. You need to use iMac Opening Wheel to slice through the adhesive and you need to use Plastic Cards (two sets) to help isolate the display from the frame and following this guide iMac Intel 27" EMC 2639 显示器更换
At this point you’ll need a new display unit [关联产品丢失或禁用： IF174-035]
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 1
总计 131
4条评论
Please let us know what the outcome was.
由 iHeartMacs 完成的
So I've changed the cable and still has the same issue. :(
Seems my screen are dead now.
由 gehucka 完成的
@dennieo - Did you get a new display?
由 Dan 完成的
Nope, I would like to get a new 5k one.
there was no reason to buy a $700 display and sell my old iMac for $1100-1200
由 gehucka 完成的